Planet 4-Port 10/100/1000T Ethernet to VDSL2 Bridge 0,1 Gbps 100 Mbps

Planet 4-Port 10/100/1000T Ethernet to VDSL2 Bridge 0,1 Gbps 100 Mbps

Produktbeschreibung:

ITU-T G.993.5 G.Vector and G.INP DMT-based coding
technology Built-in POST splitter to share voice
and date One RJ11 connector for VDSL port with
VDSL connection One phone connector for telephone
connection Voice and data communication can be
shared simultaneously based on the existing telephone
wire CO/CPE mode selectable via DIP switch Selectable
target band plan and SNR margin Up to 200/100Mbps (G.INP,
Asym, 8dB) bandwidth 4 10/100/1000BASE-TX LAN
ports Complies with IEEE 802.3,
10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x,
flow control Ethernet standards Half duplex back
pressure and IEEE 802.3x full duplex pause frame
flow control Supports IEEE 802.1Q VLAN tag transparency
VDSL2 stand-alone transceiver for simple bridge
modem application Advantage of minimum installation
time (Simply Plug-and-Play) Supports extensive
LED indicators for network diagnosis Compact in
size and easy to install High Performance Gigabit
Ethernet over Phone Wire Solution:PLANET VC-234G,
a new-generation and high-performance Gigabit
Ethernet-over-VDSL2 Converter,
works well with a pervasive telephone line network
with a symmetric (downstream/upstream) data rate
of up to 150/150Mbps (G.INP,
Sym, 8dB) over a distance of 300m and 20/12Mbps
over a long distance of 1.4km.
It is based on the two-core networking technology,
Gigabit Ethernet and VDSL2 (Very-high-data-rate
Digital Subscriber Line 2).
The VDSL2 technology offers absolutely the fastest
data transmission speed over the existing copper
telephone lines without the need of rewiring.With
integrated support for the ITU-T’s new G.993.5
vectoring technology,
the VC-234G works in conjunction with vectoring-enabled
DSLAMs to remove crosstalk interference and improve
maximum line bandwidth across the existing copper
telephone infrastructure.
Implementing with Existing Telephone Copper Wires:The
VC-234G is also a Long Reach Ethernet (LRE) Bridge
providing four RJ45 Ethernet ports and two RJ11 phone jacks,
in which one is for VDSL connection and the other
one is for POTS (Plain Old Telephone Service) connection.
The VC-234G has a built-in POTS splitter to share
the existing phone line with POTS;
therefore, there is no need to replace the existing
copper wiring.
Just plug the VC-234G into the existing RJ11 telephone
jack and a high-performance VDSL2 network can be connected.
The VC-234G is ideal to be used as an Ethernet
extender to an existing Ethernet network.
Delivering High-demand Service Connectivity for
ISP/Triple Play Devices:The VC-234G provides excellent
bandwidth to satisfy the triple play devices for
home entertainment and communication.
With the capability of 200/100Mbps (G.INP, Asym,
8dB) asymmetric data transmission, the VC-234G
enables many multi-media services to work on the
local Internet,
such as VoD (video on demand), voice over IP, video phone,
IPTV, Internet caching server, distance education,
and so on. Easy and Flexible Installation:The
Ethernet-over-VDSL2 Converter comes with a Plug-and-Play
design and is fully compatible with all kinds
of network protocols.
Moreover, the operating status of each individual
port and the whole system can be watched via the
rich diagnostic LEDs on the front panel.
The VC-234G offers two modes, CPE and CO, for
application -- CPE mode is used at client side
and CO mode is at central side.
The CPE or CO mode can be adjusted by using a
built-in DIP switch.
For the point-to-point connection, a CPE mode
and a CO mode must be set up as one pair of converters
to perform the connection.
  ADSL2+ FallbackFor those ISPs that still provide
ADSL broadband service,
the VC-234G can support a downstream rate of up
to 24Mbps and an upstream rate of 1Mbps with the
ADSL2+ technology.
The VC-234G can also be directly switched over
to VDSL2 after the network upgrade.

Technische Details: