Planet Switch L2+ managed 16 x 10/100/1000 + 4 x SFP an Rack montierbar AC 120/230 V/DC 36 60 V

Planet Switch L2+ managed 16 x 10/100/1000 + 4 x SFP an Rack montierbar AC 120/230 V/DC 36 60 V

Produktbeschreibung:

16-port 10/100/1000BASE-T RJ45 copper 4 100/1000BASE-X
mini-GBIC/SFP slots,
compatible with 100BASE-FX SFP RJ45 to RS232 DB9
console interface for basic management and setup
  Hardware Conformance One 100 to 240V AC or dual
36 to 60V DC power input,
redundant power with polarity reverse protection
function - Active-active redundant power failure
protection - Backup of catastrophic power failure
on one supply - Fault tolerance and resilience
19-inch rack-mountable design IP30 metal case
Supports 6000V DC Ethernet ESD protection -40
to 75 degrees C operating temperature for DC power
input -10 to 60 degrees C operating temperature
for AC power input   Digital Input & Digital Output
2 Digital Input (DI) 2 Digital Output (DO) Integrates
sensors into auto alarm system Transfers alarm
to IP network via email and SNMP trap   Layer
3 IP Routing Features Supports maximum 32 static
routes and route summarization   Layer 2 Features
Prevents packet loss with back pressure (half-duplex)
and IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture,
and runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth Storm control
support - Broadcast/Multicast/Unknown unicast
Supports VLAN - IEEE 802.1Q tagged VLAN - Up to
255 VLANs groups,
out of 4095 VLAN IDs - Provides Bridging (VLAN
Q-in-Q) support (IEEE 802.1ad) - Private VLAN
Edge (PVE) - Protocol-based VLAN - MAC-based VLAN
- IP subnet-based VLAN - Voice VLAN Supports Spanning
Tree Protocol - IEEE 802.1D Spanning Tree Protocol
(STP) - IEEE 802.1w Rapid Spanning Tree Protocol
(RSTP) - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN - BPDU Guard Supports Link
Aggregation - 802.3ad Link Aggregation Control
Protocol (LACP) - Cisco ether-channel (static
trunk) - Maximum 10 trunk groups,
with 8 ports for each trunk - Up to 16Gbps bandwidth
(full duplex mode) Provides port mirror (many-to-1)
Port mirroring monitors the incoming or outgoing
traffic on a particular port Loop protection to
avoid broadcast loops Supports E.R.P.S.
(Ethernet Ring Protection Switching) IEEE 1588
and Synchronous Ethernet network timing (Port1
~ 12)   Quality of Service Ingress shaper and
egress rate limit per port bandwidth control 8
priority queues on all switch ports Traffic classification
- IEEE 802.1p CoS - ToS/DSCP/IP precedence of
IPv4/IPv6 packets - IP TCP/UDP port number - Typical
network application Strict priority and Weighted
Round Robin (WRR) CoS policies Traffic-policing
policies on the switch port DSCP remarking   Multicast
Supports IGMP snooping v1,
v2 and v3 Supports MLD snooping v1 and v2 Querier
mode support IGMP snooping port filtering MLD
snooping port filtering MVR (Multicast VLAN Registration)
  Security Authentication - IEEE 802.1x port-based/MAC-based
network access authentication - IEEE 802.1x authentication
with guest VLAN - Built-in RADIUS client to cooperate
with the RADIUS servers - RADIUS/TACACS+ users
access authentication Access Control List - IP-based
Access Control List (ACL) - MAC-based Access Control
List (ACL) Source MAC/IP address binding DHCP
Snooping to filter distrusted DHCP messages Dynamic
ARP Inspection discards ARP packets with invalid
MAC address to IP address binding IP Source Guard
prevents IP spoofing attacks IP address access
management to prevent unauthorized intruder  
Management IPv4 and IPv6 dual stack management
Switch Management Interfaces - Console/Telnet
command line interface - Web switch management - SNMP v1,
v2c, and v3 switch management - SSH/SSL secure
access IPv6 address/NTP management Built-in Trivial
File Transfer Protocol (TFTP) client BOOTP and
DHCP for IP address assignment System Maintenance
- Firmware upload/download via HTTP/TFTP - Reset
button for system reboot or reset to factory default
- Dual images DHCP relay and option 82 User privilege
levels control NTP (Network Time Protocol) Link
Layer Discovery Protocol (LLDP) and LLDP-MED Network
diagnostic - SFP-DDM (Digital Diagnostic Monitor)
- Cable diagnostic technology provides the mechanism
to detect and report potential cabling issues
- ICMPv6/ICMPv4 remote ping SMTP/Syslog remote
alarm Four RMON groups (history,
statistics, alarms and events) SNMP trap for interface
link up and link down notification System Log
PLANET Smart Discovery Utility for deployment
management   PLANET IGS-5225-16T4S,
a new industrial Layer 2+ managed Gigabit Switch,
features 16 10/100/1000Mbps ports and 4 100/1000X SFP ports,
and supports static Layer 3 routing in a 1U case.
With a total switch fabric of 40Gbps, the IGS-5225-16T4S
can handle large amounts of data in a secure topology
linking to an industrial backbone or high capacity servers.
The IGS-5225-16T4S is capable of providing non-blocking
switch fabric and wire-speed throughput in the
temperature range from -40 to 75 degrees C without
any packet loss and CRC error.
It greatly simplifies the tasks of upgrading the
industrial LAN for catering to increasing bandwidth demands.
Furthermore, it adopts user-friendly “Front Access”
design for easy wiring and maintenance of the
IGS-5225-16T4S when placed in the cabinet.
  AC and DC Redundant Power to Ensure Continuous
Operation The IGS-5225-16T4S possesses a 100~240V
AC power supply and dual 36~60V DC power supply
utilized as redundant power supply to ensure its
continuous operation.
Its redundant power system is specifically designed
to handle the demands of high-tech facilities
requiring the highest power integrity.
Furthermore, with the 36~60V DC power supply implemented,
the IGS-5225-16T4S can be applied as a telecom
level device and placed in almost any difficult environment.
  Digital Input and Digital Output for External
Alarm To help the network administrators efficiently
manage unexpected network situations,
the IGS-5225-16T4S provides Digital Input and
Digital Output for external alarm device on the front panel.
The Digital Input can be used to detect and log
the status of the external devices such as door
intrusion detector.
The Digital Output could be used to send alarm
whenever the IGS-5225-16T4S has port link-down
or power failure.
  Effective Alarm Alert for Better Protection
The IGS-5225-16T4S supports a Fault Alarm feature
which can alert the users when there is something
wrong with the switches.
With this ideal feature, the users would not have
to waste time to find where the problem is.
It will help to save time and human resource.
  IPv6/IPv4 Dual Stack Supporting both IPv6 and
IPv4 protocols,
the IGS-5225-16T4S helps data centers, campuses,
telecoms, and more to experience the IPv6 era
with the lowest investment as its network facilities
need not be replaced or overhauled if the IPv6
FTTx edge network is set up.
  Layer 3 IPv4 and IPv6 VLAN Routing for Secure
and Flexible Management The IGS-5225-16T4S offers
IPv4/IPv6 VLAN routing feature which allows to
crossover different VLANs and different IP addresses
for the purpose of having a highly-secure,flexible
management and simpler networking application.
  Robust Layer 2 Features The Switch can be programmed
for advanced switch management functions such
as dynamic port link aggregation,
Q-in-Q VLAN, private VLAN, Multiple Spanning Tree
Protocol (MSTP),
Layer 2 to Layer 4 QoS, bandwidth control and
IGMP/MLD Snooping.
Via the link aggregation of supporting ports,
the IGS-5225-16T4S allows the operation of a high-speed
trunk to combine with multiple fiber ports and
supports fail-over as well.
   Powerful Security The IGS-5225-16T4S offers
a comprehensive layer 2 to layer 4 Access Control
List (ACL) for enforcing security to the edge.
It can be used to restrict network access by denying
packets based on source and destination IP address,
TCP/UDP ports or defined typical network applications.
Its protection mechanism also comprises 802.1X
Port-based and MAC-based user,
and device authentication. With the private VLAN function,
communication between edge ports can be prevented
to ensure user privacy.
The IGS-5225-16T4S also provides DHCP Snooping,
IP Source Guard and Dynamic ARP Inspection functions
to prevent IP snooping from attack and discard
ARP packets with invalid MAC address.
The network administrators can now construct highly-secure
corporate networks with considerably less time
and effort than before.
  Excellent Traffic Control The IGS-5225-16T4S
is loaded with powerful traffic management and
QoS features to enhance connection services by
telecoms and ISPs.
The QoS features include wire-speed Layer 4 traffic
classifiers and bandwidth limit that are particularly
useful for multi-tenant units,
multi-business units, Telco and network service
providers’ applications.
It also empowers the industrial environment to
take full advantage of the limited network resources
and guarantees the best performance in VoIP and
video conferencing transmission.
   Efficient and Secure Management With built-in
Web-based management interface,
the IGS-5225-16T4S L2+ Managed Switch offers an easy-to-use,
platform-independent management and configuration
facility which includes Console,
Web and SNMP management interfaces. The SNMP can
be managed via any management software based on
the standard of SNMP Protocol.
For reducing product learning time, it offers
Cisco-like command via Telnet or console port
and customer does not need to learn new console command.
Moreover, it also offers secure remote management
by supporting SSH,
SSL and SNMP v3 connections which encrypt the
packet content at each session.
  Flexibility and Extension Solution The four
mini-GBIC slots built in the IGS-5225-16T4S support
dual speed as it features 100BASE-FX and 1000BASE-SX/LX
SFP (Small Form-factor Pluggable) fiber-optic modules.
Now the administrator can flexibly choose the
suitable SFP transceiver according to not only
the transmission distance,
but also the transmission speed required. The
distance can be extended from 550 meters to 2km
(multi-mode fiber) or up to 10/20/30/40/50/70/120
kilometers (single-mode fiber or WDM fiber).
They are well suited for applications within the
industrial data centers and distributions.
  Intelligent SFP Diagnosis Mechanism The IGS-5225-16T4S
supports SFP-DDM (Digital Diagnostic Monitor)
function that greatly helps network administrator
to easily monitor real-time parameters of the SFP,
such as optical output power, optical input power,
temperature, laser bias current, and transceiver
supply voltage.
   

Technische Details: