Planet Switch L3 managed 16 x 10/100/1000 PoE+ + 4 x Gigabit SFP an DIN-Schiene montierbar wandmontierbar 320 W Gleichstrom

Planet Switch L3 managed 16 x 10/100/1000 PoE+ + 4 x Gigabit SFP an DIN-Schiene montierbar wandmontierbar 320 W Gleichstrom

Produktbeschreibung:

16x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
with IEEE 802.3at PoE+ Injector function 4x 100/1000BASE-X
mini-GBIC/SFP slots for SFP type auto detection
1x RJ45 console interface for basic management
and setup   Power over Ethernet: Complies with
IEEE 802.3at Power over Ethernet Plus/end-span
PSE Up to 16 IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE
port Auto detects powered device (PD) Circuit
protection prevents power interference between
ports Remote power feeding up to 100m PoE management
features Total PoE power budget control Per port
PoE function enable/disable PoE admin-mode control
PoE port power feeding priority Per PoE port power
limit PD classification detection Intelligent
PoE features Temperature threshold control PoE
usage threshold control PD alive check PoE schedule
  Industrial Protocol: Modbus TCP for real-time
monitoring in the SCADA system IEEE 1588v2 PTP
(Precision Time Protocol)   Industrial Case and
Installation: IP30 aluminum case DIN-rail or wall-mount
design 48~56V DC,
redundant power with polarity reverse protect
function Supports 6KV DC Ethernet ESD protection
-40 to 75 degrees C operating temperature   Digital
Input and Digital Output: 2 digital input (DI)
2 digital output (DO) Integrate sensors into auto
alarm system Transfer alarm to IP network via
email and SNMP trap   Layer 2 Features: Prevents
packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture,
and runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth Storm Control
support Broadcast/Multicast/Unicast Supports VLAN
IEEE 802.1Q tagged VLAN Up to 255 VLANs groups,
out of 4094 VLAN Ids Provider Bridging (VLAN Q-in-Q)
support (IEEE 802.1ad) Private VLAN Edge (PVE)
Protocol-based VLAN MAC-based VLAN Voice VLAN
GVRP (GARP VLAN Registration Protocol) Supports
Spanning Tree Protocol IEEE 802.1D Spanning Tree
Protocol (STP) IEEE 802.1w Rapid Spanning Tree
Protocol (RSTP) IEEE 802.1s Multiple Spanning
Tree Protocol (MSTP),
spanning tree by VLAN BPDU Guard Supports Link
Aggregation 802.3ad Link Aggregation Control Protocol
(LACP) Cisco ether-channel (static trunk) Maximum
10 trunk groups with 4 ports per trunk group Up
to 8Gbps bandwidth (duplex mode) Provides port
mirror (many-to-1) Port mirroring to monitor the
incoming or outgoing traffic on a particular port
Loop protection to avoid broadcast loops Supports
ERPS (Ethernet Ring Protection Switching) Compatible
with Cisco Uni-directional link detection(UDLD)
that monitors a link between two switches and
blocks the ports on both ends of the link if the
link fails at any point between the two devices
Link Layer Discovery Protocol (LLDP)   Layer 3
IP Routing Features: Supports maximum 128 static
routes and route summarization IPv4 dynamic routing
protocol supports OSPFv2 IPv4/IPv6 hardware static
routing Routing interface provides per VLAN routing
mode   Quality of Service: Ingress Shaper and
Egress Rate Limit per port bandwidth control 8
priority queues on all switch ports Traffic classification
IEEE 802.1p CoS IP TOS/DSCP/IP precedence IP TCP/UDP
port number Typical network application Strict
priority and Weighted Round Robin (WRR) CoS policies
Supports QoS and In/Out bandwidth control on each
port Traffic-policing on the switch port DSCP
remarking   Multicast: Supports IPv4 IGMP snooping v1,
v2 and v3 Supports IPv6 MLD snooping v1 and v2
Querier mode support IPv4 IGMP snooping port filtering
IPv6 MLD snooping port filtering MVR (Multicast
VLAN Registration)   Security: Authentication
IEEE 802.1x port-based /
MAC-based network access authentication Built-in
RADIUS client to co-operate with the RADIUS servers
TACACS+ login users access authentication RADIUS /
TACACS+ users access authentication Access Control
List IP-based Access Control List (ACL) MAC-based
Access Control List Source MAC /
IP address binding DHCP Snooping to filter un-trusted
DHCP messages Dynamic ARP Inspection discards
ARP packets with invalid MAC address to IP address
binding IP Source Guard prevents IP spoofing attacks
IP address access management to prevent unauthorized
intruder   Management: IPv4 and IPv6 dual stack
management Switch Management Interfaces Console/Telnet
Command Line Interface Web switch management SNMP
v1 and v2c switch management SSH,
TLS, SSL and SNMP v3 secure access SNMP Management
Four RMON groups (history,
statistics, alarms, and events) SNMP trap for
interface Link Up and Link Down notification IPv6
IP address/NTP/DNS management Built-in Trivial
File Transfer Protocol (TFTP) client BOOTP and
DHCP for IP address assignment System Maintenance
Firmware upload/download via HTTP/TFTP Reset button
for system reboot or reset to factory default
Dual Images DHCP Relay and DHCP Option 82 DHCP
Server User Privilege levels control Network Time
Protocol (NTP) SFP-DDM (Digital Diagnostic Monitor)
Network Diagnositc ICMPv6/ICMPv4 Remote Ping Cable
diagnostic technology provides the mechanism to
detect and report potential cabling issues PLANET
Smart Discovery Utility for deployment management
SMTP/Syslog remote alarm System Log

Technische Details: