Planet Switch L4 managed 8 x 1000Base-T + 16 x 1000Base-X an Rack montierbar

Planet Switch L4 managed 8 x 1000Base-T + 16 x 1000Base-X an Rack montierbar

Produktbeschreibung:

Managed Metro Ethernet Switch 16x 100/1000BASE-X
mini-GBIC/SFP slots 8x 10/100/1000BASE-T RJ45
copper ports RJ45 to RS232 DB9 console interface
for basic management and setup Redundant Power
System Digital Input /
Digital Output   Multiple SFP Fiber Port Switch
for All Long-Reach Network Customers PLANET MGSW-24160F
is ideal for all long-reach network customers,
such as enterprises, telecoms, campuses and service
providers as it comes with advanced management functions,
and 16 100/1000Mbps dual speed SFP Fiber ports
and 8 10/100/1000Mbps TP ports with a rugged case.
It is capable of providing non-blocking switch
fabric and wire-speed throughput of as high as
48 Gbps in the temperature range from 0 to 60
degrees C without any packet loss and CRC error.
Thus, it is certainly a must for those who want
to further upgrade their existing network infrastructures
to a level where bandwidth demands can be met.
Furthermore, it adopts “Front Access” design for
easy wiring and maintenance of the MGSW-24160F
when placed in the cabinet.
  Flexibility and Extension Solution The 16 mini-GBIC
slots built in the MGSW-24160F support dual speed
as it features 100BASE-FX and 1000BASE-SX/LX SFP
(Small Form-factor Pluggable) fiber-optic modules.
The administrator can flexibly choose the suitable
SFP transceiver when considering transmission
distance and speed.
The distance can be extended from 550 meters to
2km for multi-mode fiber,
and up to 10/20/30/40/50/70/120 kilometers for
single-mode fiber or WDM fiber.
They are well suited for applications within the
enterprise data centers and distributions.
  Intelligent SFP Diagnosis Mechanism The MGSW-24160F
supports SFP-DDM (Digital Diagnostic Monitor)
function that greatly helps network administrator
to easily monitor real-time parameters of the SFP,
such as optical output power, optical input power,
temperature, laser bias current, and transceiver
supply voltage.
   AC and DC Redundant Power to Ensure Continuous
Operation The MGSW-24160F is equipped with one
100~240V AC power supply unit and one additional
36~60V DC power supply unit for redundant power
supply installation.
A redundant power system is also provided to enhance
the reliability with either AC or DC power supply unit.
The redundant power system is specifically designed
to handle the demands of high-tech facilities
requiring the highest power integrity.
Furthermore, with the 36~60V DC power supply implemented,
the MGSW-24160F can be applied as the telecom level device.
   Effective Alarm Alert for Better Protection
The MGSW-24160F supports a Fault Alarm feature
which can alert the users when there is something
wrong with the switches.
With this ideal feature, the users would not have
to waste time to find where the problem is.
It will help to save time and human resource.
   Digital Input and Digital Output for External
Alarm The MGSW-24160F helps the network administrators
efficiently manage the unexpected network situations
by providing Digital Input and Digital Output
for external alarm device on the front panel.
The Digital Input can be used to detect and log
the status of the external devices such as door
intrusion detector.
The Digital Output could be used to send alarm
whenever the MGSW-24160F has port link-down or
power failure.
  IPv6 / IPv4 Dual Stack Supporting both IPv6
and IPv4 protocols,
the MGSW-24160F helps data centers, campuses, telecoms,
and more to experience the IPv6 era with the lowest
investment as its network facilities need not
to be replaced or overhauled if the IPv6 FTTx
edge network is set up.
   Layer 3 IPv4 and IPv6 VLAN Routing for Secure
and Flexible Management The MGSW-24160F switch
not only provides ultra high transmission performance,
and excellent layer 2 and layer 4 technologies,
but also layer 3 IPv4/IPv6 VLAN routing feature
which allows to crossover different VLANs and
different IP addresses for the purpose of having
a highly-secured,
flexibly-managed and simple networking application.
  Robust Layer 2 Features The MGSW-24160F can
be programmed for advanced switch management functions
such as dynamic port link aggregation,
Q-in-Q VLAN, private VLAN, Multiple Spanning Tree
Protocol (MSTP),
Layer 2 to Layer 4 QoS, bandwidth control and
IGMP/MLD Snooping.
Via the link aggregation of supporting ports,
the MGSW-24160F allows the operation of a high-speed
trunk to combine with multiple fiber ports and
supports fail-over as well.
   Powerful Security The MGSW-24160F offers a
comprehensive layer 2 to layer 4 Access Control
List (ACL) for enforcing security to the edge.
It can be used to restrict network access by denying
packets based on source and destination IP address,
TCP/UDP ports or defined typical network applications.
Its protection mechanism also comprises 802.1X
Port-based and MAC-based user and device authentication.
With the private VLAN function, communication
between edge ports can be prevented to ensure user privacy.
The MGSW-24160F also provides DHCP Snooping, IP
Source Guard and Dynamic ARP Inspection functions
to prevent IP snooping from attack and discard
ARP packets with invalid MAC address.
The network administrators can now construct highly-secured
corporate networks with considerably less time
and effort than before.
  Excellent Traffic Control The MGSW-24160F is
loaded with powerful traffic management and QoS
features to enhance connection services by telecoms and ISPs.
The QoS features include wire-speed Layer 4 traffic
classifiers and bandwidth limit that are particular
useful for multi-tenant unit,
multi-business unit, Telco, or network service
provider’s applications.
It also empowers the enterprises to take full
advantage of the limited network resources and
guarantees the best performance in VoIP and video
conferencing transmission.
  Efficient and Secure Management With built-in
Web-based management interface,
the MGSW-24160F L2+ Managed Switch offers an easy-to-use,
platform-independent management and configuration
facility which includes Console,
Web and SNMP management interfaces. The SNMP can
be managed via any management software based on
the standard of SNMP protocol.
For reducing product learning time, it offers
Cisco-like command via Telnet or console port
and customer does not need to learn new console command.
Moreover, it also offers secure remote management
by supporting SSH,
SSL and SNMP v3 connections which encrypt the
packet content at each session.

Technische Details: